{"title":"Epoxy \u0026 Casting Resin","description":"\u003cp\u003eEpoxy casting resin – a clear carrier for glow pigments.\u003c\/p\u003e","products":[{"product_id":"epoxid-giessharz-set-1-kg-harz-0-5-kg-haerter","title":"Epoxy Casting Resin Set – 1 kg Resin + 0.5 kg Hardener S49","description":"\u003cp\u003eA clear, UV-stabilised epoxy casting resin system consisting of 1 kg epoxy resin 100 and 0.5 kg hardener S49. It cures slowly: air bubbles have time to rise, and layers of up to 3 cm can be poured in one go. This makes it a suitable carrier for our glow pigments and glow granules.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e 1 kg epoxy resin 100 and 0.5 kg hardener S49 – makes 1.5 kg of casting compound\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMixing ratio:\u003c\/strong\u003e 100 : 47 by weight (resin : hardener)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLayer thickness:\u003c\/strong\u003e up to 3 cm in one pour\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePot life:\u003c\/strong\u003e approx. 12 h 40 min at 20 °C, approx. 2 h 20 min at 30 °C (1,000 g mix, according to the technical data sheet)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCuring:\u003c\/strong\u003e at room temperature; fully chemically cured after approx. 14 days at a minimum of 23 °C; post-curing above 40 °C possible\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAppearance:\u003c\/strong\u003e highly transparent and UV-stabilised\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e cast and art objects, jewellery, decoration, filling tree trunks, furniture coatings and sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the casting resin\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eWeigh out resin and hardener in a ratio of 100 : 47 by weight – for example 200 g resin and 94 g hardener.\u003c\/li\u003e\n\u003cli\u003eStir thoroughly and slowly, including the sides and bottom. Details are given in the enclosed instructions.\u003c\/li\u003e\n\u003cli\u003eFor glow effects, let the mixed resin thicken slightly so that it becomes a little thicker, then stir in the pigment. As a starting point, approx. 20% pigment relative to the resin; test on a small sample first.\u003c\/li\u003e\n\u003cli\u003ePour and leave to cure at room temperature. Rising air bubbles can be removed with a heat gun.\u003c\/li\u003e\n\u003cli\u003ePour objects thicker than 3 cm in several layers.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e Pigments sink in thin, runny resin. If you want an evenly glowing surface, add the pigment to a separate top layer.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e1 kg lumentics epoxy resin 100, 0.5 kg lumentics hardener S49 and detailed instructions. The processing instructions and technical data sheet are also available for download.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eResin and hardener carry the following hazard statements. \u003cstrong\u003eResin\u003c\/strong\u003e (signal word “Warning”, pictograms GHS07 exclamation mark and GHS09 environment): H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects. EUH205 Contains epoxy constituents. May produce an allergic reaction. \u003cstrong\u003eHardener\u003c\/strong\u003e (signal word “Danger”, pictograms GHS05 corrosion, GHS07 exclamation mark and GHS09 environment): H302 + H312 Harmful if swallowed or in contact with skin. H318 Causes serious eye damage. H411 Toxic to aquatic life with long lasting effects. Wear protective gloves, protective clothing and eye protection and work in a well-ventilated area. In case of eye contact, rinse cautiously with water for several minutes; for the hardener, get medical advice immediately. Dispose of residues and containers in accordance with local regulations. All information is given in the safety data sheets for resin and hardener, which you can download from this page.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213196292480,"sku":"epoxy-set-1kg-s49","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/harz-system-01.png?v=1792939296"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/collections\/harz-system-01.png?v=1793113742","url":"https:\/\/lumentics.com\/collections\/epoxidharz-giessharz.oembed","provider":"lumentics","version":"1.0","type":"link"}