{"title":"Glow-in-the-dark pigments","description":"\u003cp\u003eGlow-in-the-dark pigments made of strontium aluminate to mix into resin, varnish, paint, glue or plastic – in green, blue-green and many other colours, whitish or coloured by day. As a starting point we recommend approx. 20% pigment relative to the carrier.\u003c\/p\u003e","products":[{"product_id":"leuchtpulver-gruen-40g-nachleuchtende-premium-pigmente","title":"Glow in the Dark Powder Green – Phosphorescent Pigment","description":"\u003cp\u003eGreen is the base shade of all glow pigments and glows longest and most intensely. The powder absorbs light and releases it in the dark as a green glow – without electricity and as often as you like. In daylight it is whitish with a slight green tint and is barely noticeable in light-coloured carriers.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – making it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 12 hours after a full charge in complete darkness; most intense in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 85 µm – fine enough for brushes and casting resin\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sun (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat-resistant:\u003c\/strong\u003e the pure pigment withstands up to 1,200 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, wallpaper paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eFor outdoor use, use weather-resistant clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g or 100 g glow powder green in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eAfterglow is an aid for orientation and effects, not a light source: it becomes visible in real darkness and barely under a street lamp. The raw pigment is not a toy. Avoid dust and contact with skin and eyes when processing larger quantities.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"40 g","offer_id":60212958462336,"sku":"pigment-natur-gruen-40g","price":12.9,"currency_code":"EUR","in_stock":true},{"title":"100 g","offer_id":60239854600576,"sku":"pigment-natur-gruen-100g","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigmente-gruen-4.jpg?v=1792939094"},{"product_id":"leuchtpulver-gruenblau-40g-nachleuchtende-premium-pigmente","title":"Glow in the Dark Powder Blue-Green 40 g – Phosphorescent Pigment","description":"\u003cp\u003eBlue-green is the popular alternative to classic green: the glow looks more harmonious and less “chemical”, and it is one of the strongest shades. In daylight the powder is whitish and barely noticeable in light-coloured carriers. It absorbs light and releases it in the dark as a blue-green glow – without electricity and as often as you like.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 12 hours after a full charge in complete darkness; at its most intense in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 85 µm (1 µm = one thousandth of a millimetre) – fine enough for brushes and casting resin\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sunlight (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat-resistant:\u003c\/strong\u003e the pure pigment withstands up to 1,200 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, wallpaper paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin, runny resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eOutdoors, use weather-resistant clear varnishes or epoxy; indoors, solvent-free carriers such as clear varnish or wallpaper paste are suitable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder Blue-Green in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eAfterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60212984480128,"sku":"pigment-natur-gruenblau-40g","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigmente-blau-gruen-4_adcebcee-c6fe-4e17-a34c-51678960d9d0.jpg?v=1792939121"},{"product_id":"leuchtpulver-blau-hellblau-40g-nachleuchtende-premium-pigmente","title":"Glow in the Dark Powder Blue – Phosphorescent, Whitish by Day","description":"\u003cp\u003eThis blue is undyed: in daylight the powder is whitish with a slight blue tint, making it the most colour-neutral of all glow pigments. In the dark it glows blue – slightly weaker than green and blue-green, but much stronger than dyed shades. The right choice if the pigment should stay as invisible as possible by day.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 12 hours after full charging in complete darkness; at its strongest in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 70 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sunlight (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat-resistant:\u003c\/strong\u003e the pure pigment withstands up to 1,200 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin, runny resin the pigment sinks: let the resin thicken slightly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eFor outdoor use, choose weatherproof clear varnishes or epoxy; indoors, solvent-free carriers such as clear varnish or wallpaper paste are suitable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g or 100 g glow powder blue in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eAfterglow is an aid to orientation and a visual effect, not a light source: it becomes visible in real darkness, hardly under a street lamp. The raw pigment is not a toy. When working with larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"40 g","offer_id":60212984545664,"sku":"pigment-natur-blau-40g","price":12.9,"currency_code":"EUR","in_stock":true},{"title":"100 g","offer_id":60239857811840,"sku":"pigment-natur-blau-100g","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigmente-blau-4_e576ce2e-ab01-4a7f-b79a-53199aee11c6.jpg?v=1792939123"},{"product_id":"leuchtpulver-lila-purpur-40-g-nachleuchtende-premium-pigmente","title":"Glow in the Dark Powder Purple 40 g – Whitish by Day","description":"\u003cp\u003ePurple is a special shade: in daylight the powder is whitish, in the dark it glows purple. To glow, it needs UV light – sunlight or a UV lamp. Normal room light barely excites it. Expect a noticeably weaker and shorter glow than with green or blue.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 2 hours after full charging in complete darkness\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e whitish by day, purple in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 70 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e best with UV light or sunlight; normal room light only excites it weakly\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat-resistant:\u003c\/strong\u003e the pigment withstands up to 1,200 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment, relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003ePurple is hard to make stand out on dark surfaces. Mixing in a little blue-green powder strengthens the glow – but it does not create a new shade.\u003c\/li\u003e\n\u003cli\u003eIn thin, runny resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eOutdoors, use weatherproof clear varnishes or epoxy; indoors, solvent-free carriers such as clear varnish or paste are suitable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder purple in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003ePurple is an effect shade for dark rooms, stage and black light – not a light source. For a long, strong afterglow, green, blue-green or blue are better suited. The raw pigment is not a toy. When working with larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60212989264256,"sku":"pigment-natur-lila-40g","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigmente-lila-4.jpg?v=1792939124"},{"product_id":"leuchtpulver-orange-40g-nachleuchtende-premium-pigmente-typ-sulfit","title":"Glow in the Dark Powder Orange 40 g – Calcium Sulfide, Special Use","description":"\u003cp\u003eThis orange glow powder is based on calcium sulfide (CaS), not strontium aluminate. It is intended for special applications where strontium aluminate is not an option and orange is needed. For all other projects we recommend our orange glow powder based on strontium aluminate: it is not classified as hazardous and is water-resistant.\u003c\/p\u003e\n\u003cp\u003eBy day the powder is orange, and in the dark it glows orange.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e calcium sulfide (CaS)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e approx. 1 hour after full charging in complete darkness; at its strongest in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 70 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with daylight or artificial light, fastest with UV light or sunlight\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat-resistant:\u003c\/strong\u003e up to 300 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCLP labelling:\u003c\/strong\u003e Warning (GHS07, GHS09). Causes skin irritation and serious eye irritation, may cause respiratory irritation, very toxic to aquatic life (H315, H319, H335, H400)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe powder must \u003cstrong\u003enot be mixed with water\u003c\/strong\u003e. Stir it into a colourless carrier such as epoxy resin, clear varnish, gel or wax. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnly work with it in the open air and do not breathe in the dust.\u003c\/li\u003e\n\u003cli\u003eWear safety goggles and protective gloves.\u003c\/li\u003e\n\u003cli\u003eDo not allow it to enter the environment, bodies of water or drains.\u003c\/li\u003e\n\u003cli\u003eThe lighter the background, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder orange (calcium sulfide) in a poly bag. The hazard statements are printed on the packaging.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eIn case of contact with the eyes, rinse cautiously with water for several minutes, remove contact lenses if present and easy to do, and continue rinsing. You can download the safety data sheet from this page. Afterglow is a visual effect, not a light source: it only becomes visible in real darkness.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60212994146688,"sku":"pigment-orange-calciumsulfid-40g","price":18.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigmente-orange-2.jpg?v=1792939133"},{"product_id":"leuchtpulver-orange-40-g-nachleuchtende-premium-pigmente-typ-sral2o4","title":"Glow in the Dark Powder Orange 40 g – Orange by Day","description":"\u003cp\u003eOrange by day and orange in the dark: this tinted pigment based on strontium aluminate adds a warm accent of colour even in daylight. After charging, it has an orange afterglow – calmer and weaker than the signal colours green and blue. A true red is technically not possible with glow pigments; orange comes closest.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 4 hours after full charging in complete darkness; strongest in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e orange by day, orange in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source; as a darker shade, orange needs strong light, ideally sunlight or UV\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature:\u003c\/strong\u003e tinted pigment – do not use above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment, relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin, runny resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eAlternatively, sprinkle it onto adhesive or absorbent surfaces, or apply it in transparent varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eOutdoors, use weatherproof clear varnishes or epoxy; indoors, solvent-free carriers such as clear varnish or paste are suitable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder orange in a poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eTinted pigments glow weaker than green or blue – ideal as a colour and effect shade, not as a light source. The glow is only visible in real darkness. The raw pigment is not a toy. When working with larger quantities, avoid dust and contact with skin and eyes. Store dry and sealed.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213030715776,"sku":"pigment-orange-orange-40g","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigmente-orange-orange-00_a426b98d-e70e-498f-af3c-2dc8ba092547.jpg?v=1792939165"},{"product_id":"leuchtpulver-rot-40g-nachleuchtende-premium-pigmente","title":"Glow in the Dark Powder Red 40 g – Red by Day, Phosphorescent","description":"\u003cp\u003eRed by day, a reddish afterglow in the dark: this strongly tinted pigment based on strontium aluminate adds a splash of colour above all in daylight. Important for your expectations: a true, intense red in the dark is technically not possible with glow pigments. The glow is considerably weaker and shorter than with green or blue.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 2 hours after a full charge in complete darkness; at its strongest in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e red in daylight, reddish in the dark and considerably weaker than green\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e as a dark shade it needs a lot of light, ideally sunlight or a UV lamp\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature:\u003c\/strong\u003e tinted pigment – do not use above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve but is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, adhesive, wallpaper paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment, relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint rather 30–50%. Test the mix on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin, runny resin the pigment sinks: let the resin thicken slightly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eFor outdoor use, choose weather-resistant clear varnishes or epoxy; indoors, solvent-free carriers such as clear varnish or wallpaper paste are suitable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder Red in a poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eRed is a colour and effect shade, not lighting. If you are mainly looking for an intense, long afterglow, green or blue-green is the better choice. The raw pigment is not a toy. When working with larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213035237760,"sku":"pigment-rot-rot-40g","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigmente-rot-rot-00_bb1f00b9-da3d-4252-9acc-bdb3be1bce1a.jpg?v=1792939167"},{"product_id":"leuchtpulver-gruen-gruen-40g-im-dunkeln-nachleuchtendes-farbpulver","title":"Glow in the Dark Powder Green-Green 40 g – Bold Green by Day","description":"\u003cp\u003eGreen-Green combines two effects: a bold green daylight colour that stands out even in bright conditions, and a green afterglow in the dark. However, the tinting reduces the glow. If a long afterglow matters more to you than the daylight colour, choose the green glow powder with a whitish daylight colour.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – making it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 4 hours after a full charge in complete darkness; strongest in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e bold green by day, green in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre) – finely ground, so also suitable for airbrush and pressure-operated spray systems\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sunlight (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature:\u003c\/strong\u003e tinted pigment – do not use above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; instead, it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, paste, wax or silicone. As a starting value we recommend \u003cstrong\u003eapprox. 20% pigment, relative to the carrier material\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eAlternatively, sprinkle it onto adhesive or absorbent surfaces, or apply it in transparent varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eOutdoors, use weatherproof clear varnishes or epoxy; indoors, solvent-free carriers such as clear varnish or paste are suitable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder Green-Green in a poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eAfterglow is an orientation and effect aid, not lighting: it becomes visible in real darkness. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213035303296,"sku":"pigment-gruen-gruen-40g","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigmente-gruen-gruen-00.jpg?v=1792939169"},{"product_id":"leuchtpulver-lila-lila-40-g-nachleuchtende-farbpigmente","title":"Glow in the Dark Powder Purple-Purple 40 g – Purple by Day","description":"\u003cp\u003ePurple by day and purple in the dark: this pigment is strongly tinted and adds a touch of colour even in daylight. After charging with UV light, it glows purple in the dark. Like all darkly tinted shades, it glows much more weakly and for a shorter time than green or blue.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 2 hours after a full charge in complete darkness\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e purple by day, purple in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e ideally with UV light or sunlight; normal room light only excites it weakly\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature:\u003c\/strong\u003e tinted pigment – do not use above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, wallpaper paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin, runny resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eOutdoors, use weather-resistant clear varnishes or epoxy; indoors, solvent-free carriers such as clear varnish or wallpaper paste are suitable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder Purple-Purple in a poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eDarkly tinted pigments are a colour and effect shade, not lighting. For a long, strong afterglow, green, blue-green or blue are better suited. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213162934656,"sku":"pigment-purple-purple-40g","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigmente-lila-lila-00.jpg?v=1792939271"},{"product_id":"leuchtpulver-weiss-weiss-40-g-nachleuchtende-farbpigmente","title":"Glow in the Dark Powder White-White 40 g – White-Glowing Pigment","description":"\u003cp\u003eWhite-White is a very white powder in daylight and glows whitish with a slight blue tint in the dark. It is the right choice when the daylight colour should stay neutral, for example on white surfaces or in clear resin. However, the afterglow is short and clearly weaker than with green or blue-green.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – making it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e very white by day, whitish to slightly bluish in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 2 hours after a full charge in complete darkness; most intense in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre) – fine enough for brushes, varnish and casting resin\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sun (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTemperature:\u003c\/strong\u003e tinted pigment – max. approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, wallpaper paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eYou can also sprinkle the powder onto sticky surfaces such as glue, wax or wallpaper paste, or apply it in clear varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eFor outdoor use, use weather-resistant clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder White-White in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor technical reasons, white glows briefly and rather weakly. If a long glow matters more to you than a pure white daylight colour, choose green or blue-green with a whitish daylight colour. Afterglow is an aid for orientation and effects, not a light source: it becomes visible in real darkness and barely under a street lamp. Colours look different in photos depending on the camera and the charge. The raw pigment is not a toy. Avoid dust and contact with skin and eyes when processing larger quantities.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213185839488,"sku":"pigment-white-white-40g","price":26.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigmente-weiss-weiss-01.png?v=1792939282"},{"product_id":"leuchtpulver-blau-blau-40-g-nachleuchtende-farbpigmente","title":"Glow in the Dark Powder Blue-Blue 40 g – Coloured Glow Pigment","description":"\u003cp\u003eBlue-Blue is a tinted glow pigment: in daylight it shows a strong blue shade, and in the dark it glows blue. It suits any surface that should also look blue during the day. If you are mainly after a long glow, the untinted blue with a whitish daylight colour is the better choice.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – making it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e strong blue by day, blue in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 2 hours after a full charge in complete darkness; most intense in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sun (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e tinted pigment – do not process above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, wallpaper paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eYou can also sprinkle the powder onto sticky surfaces such as glue, wax or wallpaper paste, or apply it in clear varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eFor outdoor use, use weather-resistant clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder Blue-Blue in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor technical reasons, tinted shades glow more weakly and for a shorter time than green or blue-green with a whitish daylight colour. In return, the powder shows a strong colour during the day too. Afterglow is an aid for orientation and effects, not a light source: it becomes visible in real darkness and barely under a street lamp. Colours look different in photos depending on the camera and the charge. The raw pigment is not a toy. Avoid dust and contact with skin and eyes when processing larger quantities.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213213528448,"sku":"pigment-blue-blue-40g","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigmente-blau-blau-0_cb868ee3-4f9b-43fb-b443-fa1cd104d760.png?v=1792939307"},{"product_id":"leuchtpulver-gelb-gelbgruen-40-g-nachleuchtende-farbpigmente","title":"Glow in the Dark Powder Yellow\/Yellow-Green 40 g – Coloured Pigment","description":"\u003cp\u003eThis pigment shows a strong neon yellow in daylight and has a yellow-green afterglow in the dark. So the surface looks colourful by day and glows at night. Because the daylight colour is light, it glows for longer than the dark tinted shades.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e strong yellow (neon yellow) in daylight, yellow-green in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 4 hours after a full charge in complete darkness; at its strongest in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre) – fine enough for brushes, varnish and casting resin\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sunlight (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e tinted pigment – do not process above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve but is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, adhesive, wallpaper paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment, relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint rather 30–50%. Test the mix on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin, runny resin the pigment sinks: let the resin thicken slightly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eYou can also scatter the powder onto tacky surfaces such as adhesive, wax or paste, or apply it in clear varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eFor outdoor use, choose weather-resistant clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder Yellow\/Yellow-Green in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor technical reasons, tinted shades glow for a shorter time than green with a whitish daylight colour. In return, the powder is a strong yellow even by day. Under black light, neon yellow looks particularly vivid. Afterglow is an aid for orientation and effect, not lighting: it becomes visible in real darkness, but hardly under a street lamp. Colours look different in photos depending on the camera and the charge. The raw pigment is not a toy. When working with larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213218017664,"sku":"pigment-yellow-yellowgreen-40g","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigment-yellow-yellowgreen-40g-01_3be64d40-d00e-46dd-ae28-24f70a4e1947.png?v=1792939308"},{"product_id":"leuchtpulver-pink-oceanpink-40-g-nachleuchtende-farbpigmente","title":"Glow in the Dark Powder Pink-Ocean Pink 40 g – Coloured Glow Pigment","description":"\u003cp\u003ePink-Ocean Pink is a tinted glow pigment with a bold signal colour: in daylight it is bright pink, and after charging it glows pink in the dark. It is suitable for resin art, decoration and nail design, where the colour should stand out during the day as well.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – making it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e bold pink by day, pink in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 2 hours after a full charge in complete darkness; strongest in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sunlight (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e tinted pigment – do not process above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; instead, it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, paste, wax or silicone. As a starting value we recommend \u003cstrong\u003eapprox. 20% pigment, relative to the carrier material\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eYou can also sprinkle the powder onto adhesive surfaces such as glue, wax or paste, or apply it in clear varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eOutdoors, use weatherproof clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder Pink-Ocean Pink in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor technical reasons, tinted shades glow more weakly and for a shorter time than green or blue-green with a whitish daylight colour. In return, the powder shows a bold colour during the day as well. Afterglow is an orientation and effect aid, not lighting: it becomes visible in real darkness, but hardly under a street lamp. Colours look different in photos depending on the camera and charging. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213227749760,"sku":"pigment-pink-oceanpink-40g","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigment-pink-oceanpink-40g-01.png?v=1792939316"},{"product_id":"leuchtpulver-pink-pink-40-g-nachleuchtende-farbpigmente","title":"Glow in the Dark Powder Pink-Pink 40 g – Coloured Glow Pigment","description":"\u003cp\u003ePink-Pink shows a strong fluorescent pink in daylight and, once charged, also glows pink in the dark – two effects from one pigment. It suits resin art, home decoration, nail polish, jewellery and candles.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – making it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e strong pink by day, pink in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 2 hours after a full charge in complete darkness; most intense in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sun (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e tinted pigment – do not process above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, wallpaper paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eYou can also sprinkle the powder onto sticky surfaces such as glue, wax or wallpaper paste, or apply it in clear varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eFor outdoor use, use weather-resistant clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder Pink-Pink in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor technical reasons, tinted shades glow more weakly and for a shorter time than green or blue-green with a whitish daylight colour. In return, the powder shows a strong colour during the day too. Afterglow is an aid for orientation and effects, not a light source: it becomes visible in real darkness and barely under a street lamp. Colours look different in photos depending on the camera and the charge. The raw pigment is not a toy. Avoid dust and contact with skin and eyes when processing larger quantities.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213227815296,"sku":"pigment-pink-pink-40g","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigment-pink-pink-40g-01.png?v=1792939318"},{"product_id":"leuchtpulver-pink-lila-40-g-nachleuchtende-farbpigmente","title":"Glow in the Dark Powder Pink-Purple 40 g – Coloured Glow Pigment","description":"\u003cp\u003ePink-Purple is a strong pink-purple colour in daylight and has a purple afterglow in the dark after charging. The colour stands out clearly by day. To charge, purple needs UV light or sunlight – with normal room light it hardly glows.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e strong pink-purple in daylight, purple in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 2 hours after a full charge in complete darkness; at its strongest in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e ideally with UV light or sunlight; the purple component hardly charges with room light\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e tinted pigment – do not process above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve but is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, adhesive, wallpaper paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment, relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint rather 30–50%. Test the mix on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin, runny resin the pigment sinks: let the resin thicken slightly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eYou can also scatter the powder onto tacky surfaces such as adhesive, wax or paste, or apply it in clear varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eFor outdoor use, choose weather-resistant clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder Pink-Purple in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor technical reasons, purple glows considerably more weakly and for a shorter time than green or blue-green and needs UV light to charge. In return, the powder shows a strong colour even by day. Afterglow is an aid for orientation and effect, not lighting: it becomes visible in real darkness, but hardly under a street lamp. Colours look different in photos depending on the camera and the charge. The raw pigment is not a toy. When working with larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213227913600,"sku":"pigment-pink-purple-40g","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigment-pink-purple-40g-01_32c684e3-be8f-4e4b-95cd-de603e01be50.png?v=1792939319"},{"product_id":"leuchtpulver-pink-rosarot-40-g-nachleuchtende-farbpigmente","title":"Glow in the Dark Powder Pink\/Rose-Red 40 g – Coloured Glow Pigment","description":"\u003cp\u003ePink\/rose-red combines a vivid pink daylight colour with a rose-red afterglow in the dark. This makes the design stand out in daylight and keeps it visible in the dark after charging. A true red is technically not possible with glow pigments – the glow looks pink to reddish.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e vivid pink by day, rose-red in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 2 hours after full charging in complete darkness; at its strongest in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sunlight (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e dyed pigment – do not process above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin, runny resin the pigment sinks: let the resin thicken slightly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eYou can also sprinkle the powder onto sticky surfaces such as glue, wax or paste, or apply it in clear varnish by airbrush.\u003c\/li\u003e\n\u003cli\u003eFor outdoor use, choose weatherproof clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder pink\/rose-red in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor technical reasons, dyed shades glow more weakly and for a shorter time than green or blue-green with a whitish daylight colour. In return, the powder shows a strong colour by day. Afterglow is an aid to orientation and a visual effect, not a light source: it becomes visible in real darkness, hardly under a street lamp. Colours look different in photos depending on the camera and the charging. The raw pigment is not a toy. When working with larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213232533888,"sku":"pigment-pink-rosered-40g","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigment-pink-rosered-40g-01.png?v=1792939321"},{"product_id":"leuchtpulver-natur-gelb-40-g-nachleuchtende-farbpigmente","title":"Glow in the Dark Powder Natural Yellow 40 g – Pale by Day, Yellow Glow","description":"\u003cp\u003eNatural Yellow is a light, neutral powder in daylight and glows yellow in the dark after charging. This keeps the surface discreet during the day, showing its colour only in the dark.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e light and whitish by day, yellow in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 2 hours after a full charge in complete darkness; at its most intense in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sunlight (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat-resistant:\u003c\/strong\u003e up to 1,200 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, wallpaper paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin, runny resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eYou can also sprinkle the powder onto adhesive surfaces such as glue, wax or wallpaper paste, or apply it in clear varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eOutdoors, use weather-resistant clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder Natural Yellow in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor technical reasons, this shade glows much more weakly and for a shorter time than green or blue-green. In return, the surface stays light and inconspicuous by day. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213245837696,"sku":"pigment-nature-yellow-40g","price":14.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigment-nature-yellow-40g-01.png?v=1792939329"},{"product_id":"leuchtpulver-natur-orangerot-40-g-nachleuchtende-farbpigmente","title":"Glow in the Dark Powder Natural Orange-Red 40 g – Light by Day","description":"\u003cp\u003eNatural Orange-Red is light and neutral in daylight and has an orange-red afterglow in the dark after charging. This sets it apart from the classic green-glowing powders without tinting the surface by day.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e light and whitish in daylight, orange-red in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 2 hours after a full charge in complete darkness; at its strongest in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sunlight (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat-resistant:\u003c\/strong\u003e up to 1,200 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve but is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, adhesive, wallpaper paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment, relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint rather 30–50%. Test the mix on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin, runny resin the pigment sinks: let the resin thicken slightly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eYou can also scatter the powder onto tacky surfaces such as adhesive, wax or paste, or apply it in clear varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eFor outdoor use, choose weather-resistant clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder Natural Orange-Red in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eA true red is technically not possible with glow pigments. For technical reasons, this shade glows considerably more weakly and for a shorter time than green or blue-green. In return, the surface stays light and unobtrusive by day. Afterglow is an aid for orientation and effect, not lighting: it becomes visible in real darkness, but hardly under a street lamp. Colours look different in photos depending on the camera and the charge. The raw pigment is not a toy. When working with larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213247213952,"sku":"pigment-nature-orangered-40g","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigment-nature-orangered-40g-01.png?v=1792939330"},{"product_id":"leuchtpulver-natur-rot-40-g-nachleuchtende-farbpigmente","title":"Glow in the Dark Powder Natural Red 40 g – Light by Day, Coloured Glow","description":"\u003cp\u003eNatural Red has a neutral, understated tint in daylight and releases the stored light in the dark as a warm, red-orange glow. It is suitable for accents that should not stand out during the day.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – making it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e light and whitish by day, warm red-orange in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 2 hours after a full charge in complete darkness; most intense in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sun (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat-resistant:\u003c\/strong\u003e up to 1,200 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, wallpaper paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eYou can also sprinkle the powder onto sticky surfaces such as glue, wax or wallpaper paste, or apply it in clear varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eFor outdoor use, use weather-resistant clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder Natural Red in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eA true red is technically not possible with glow pigments – the glow looks red-orange. For technical reasons, this shade glows clearly more weakly and for a shorter time than green or blue-green. In return, the surface stays light and inconspicuous by day. Afterglow is an aid for orientation and effects, not a light source: it becomes visible in real darkness and barely under a street lamp. Colours look different in photos depending on the camera and the charge. The raw pigment is not a toy. Avoid dust and contact with skin and eyes when processing larger quantities.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213253046656,"sku":"pigment-nature-red-40g","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigment-nature-red-40g-01.png?v=1792939332"},{"product_id":"leuchtpulver-natur-oceanpink-40-g-nachleuchtende-farbpigmente","title":"Glow in the Dark Powder Natural Ocean Pink 40 g – Coloured Glow","description":"\u003cp\u003eNatural Ocean Pink is light and neutral in daylight and, once charged, shows a violet-pink shimmer in the dark. It charges best with UV light or sun.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – making it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e light and whitish by day, violet-pink in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 2 hours after a full charge in complete darkness; most intense in the first few minutes\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 20–30 µm (1 µm = one thousandth of a millimetre)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e best with UV light or sun; room light barely charges the purple component\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat-resistant:\u003c\/strong\u003e up to 1,200 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the glow powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, wallpaper paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eYou can also sprinkle the powder onto sticky surfaces such as glue, wax or wallpaper paste, or apply it in clear varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eFor outdoor use, use weather-resistant clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g glow powder Natural Ocean Pink in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eFor technical reasons, this shade glows clearly more weakly and for a shorter time than green or blue-green. In return, the surface stays light and inconspicuous by day. Afterglow is an aid for orientation and effects, not a light source: it becomes visible in real darkness and barely under a street lamp. Colours look different in photos depending on the camera and the charge. The raw pigment is not a toy. Avoid dust and contact with skin and eyes when processing larger quantities.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213256094080,"sku":"pigment-nature-oceanpink-40g","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigment-nature-oceanpink-40g-01.png?v=1792939334"},{"product_id":"superpremium-leuchtpulver-natur-gruenblau-40g-hochleistungspigment-mit-150-m","title":"SuperPremium Glow in the Dark Powder Natural Green-Blue 40 g – 150 µm","description":"\u003cp\u003eAt approx. 150 µm, the SuperPremium powder has our coarsest particle size and therefore glows particularly strongly. Natural green-blue is whitish by day and glows blue-green in the dark – a harmonious shade that looks less “chemical” than pure green. It is made for casting resin, resin tables and resin art.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 150 µm – our coarsest particle size (standard natural shades: approx. 70–85 µm)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e whitish by day, blue-green in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 12 hours after full charging in complete darkness; after SuperPremium Green, the second-strongest glowing pigment in our range\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sunlight (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat-resistant:\u003c\/strong\u003e the pure pigment withstands up to 1,200 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the SuperPremium powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, paste, wax or silicone. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment, relative to the carrier\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for casting resin, resin tables and resin art, for sprinkling and for thicker layers.\u003c\/li\u003e\n\u003cli\u003eFor fine brushwork, airbrush, screen printing or thin varnish layers the particle size is too coarse – our finer pigments are suitable for that.\u003c\/li\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin, runny resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eYou can also sprinkle the powder onto adhesive surfaces such as glue, wax or paste, or apply it in clear varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eOutdoors, use weatherproof clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g SuperPremium glow powder natural green-blue (150 µm) in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThe coarse particle size glows most strongly but is too coarse for many applications: in thin layers and fine lines the grains remain visible or are hard to distribute. Coarse grains sink faster in thin, runny resin. Afterglow is an aid for orientation and effects, not a light source: it becomes visible in real darkness, but barely under a streetlight. Colours look different in photos depending on the camera and charging. The raw pigment is not a toy. When working with larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213324120448,"sku":"pigment-bluegreen-150um-40g","price":20.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigmente-blau-gruen-4_4d55bf9c-2de3-4e4d-b387-06d742f4a342.jpg?v=1792939386"},{"product_id":"superpremium-leuchtpulver-natur-gruen-40g-hochleistungspigment-mit-150-m","title":"SuperPremium Glow in the Dark Powder Natural Green 40 g – 150 µm","description":"\u003cp\u003eAt approx. 150 µm, the SuperPremium powder has our coarsest particle size – and is the most strongly glowing pigment in our range. By day it is whitish, in the dark it glows green. It is made for casting resin, resin tables and resin art, where the pigment lies in thicker layers.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – making it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e approx. 150 µm – our coarsest particle size (standard natural shades: approx. 70–85 µm)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e whitish by day, green in the dark\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e up to 12 hours after a full charge in complete darkness; the most strongly glowing pigment in our range\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharging:\u003c\/strong\u003e with any light source, fastest with UV light or sunlight (a few minutes)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat-resistant:\u003c\/strong\u003e the pure pigment withstands up to 1,200 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the SuperPremium powder\u003c\/h3\u003e\n\u003cp\u003eThe pigment does not dissolve; instead, it is stirred into a carrier: epoxy and casting resin, clear varnish, acrylic paint, glue, paste, wax or silicone. As a starting value we recommend \u003cstrong\u003eapprox. 20% pigment, relative to the carrier material\u003c\/strong\u003e; in opaque carriers such as white wall paint, rather 30–50%. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for casting resin, resin tables and resin art, for scattering and for thicker layers.\u003c\/li\u003e\n\u003cli\u003eThe particle size is too coarse for fine brushwork, airbrush, screen printing or thin varnish layers – our finer pigments are suitable for those.\u003c\/li\u003e\n\u003cli\u003eThe more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.\u003c\/li\u003e\n\u003cli\u003eIn thin resin the pigment sinks: let the resin thicken briefly, then stir it in.\u003c\/li\u003e\n\u003cli\u003eYou can also sprinkle the powder onto adhesive surfaces such as glue, wax or paste, or apply it in clear varnish with an airbrush.\u003c\/li\u003e\n\u003cli\u003eOutdoors, use weatherproof clear varnishes or epoxy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e40 g SuperPremium glow powder Natural Green (150 µm) in a resealable poly bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eThe coarse particle size glows most strongly, but is too coarse for many applications: in thin layers and fine lines, the grains remain visible or are difficult to distribute. Coarse grains sink faster in thin resin. Afterglow is an orientation and effect aid, not lighting: it becomes visible in real darkness, but hardly under a street lamp. Colours look different in photos depending on the camera and charging. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60213324382592,"sku":"pigment-green-150um-40g","price":20.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/pigmente-gruen-3_6f452525-755a-457d-8843-afc67205d0ad.jpg?v=1792939388"},{"product_id":"feinpigment-natur-gruen-5-15um-100g","title":"Fine Glow Pigment Natural Green 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eNatural Green:\u003c\/strong\u003e whitish by day; in the dark the pigment glows green.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Natural Green – whitish by day, glows green. You will find all 11 colours under \u003ca href=\"\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Natural Green in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232670282112,"sku":"pigment-nature-green-100g-15um","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-natur-gruen-5-15um-100g_f64f8dc6-5dc0-4c3f-b9f0-3c204b094c48.jpg?v=1793116582"},{"product_id":"feinpigment-terracotta-5-15um-100g","title":"Fine Glow Pigment Terracotta 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eTerracotta:\u003c\/strong\u003e brownish by day; in the dark the pigment glows green.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Terracotta – brownish by day, glows green. You will find all 11 colours under \u003ca href=\"\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Terracotta in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232670773632,"sku":"pigment-terracotta-green-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-terracotta-5-15um-100g_d8e3ac07-3daa-4291-a263-cf31b031e8a8.jpg?v=1793116588"},{"product_id":"feinpigment-lila-blau-5-15um-100g","title":"Fine Glow Pigment Purple-Blue 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003ePurple-Blue:\u003c\/strong\u003e purple by day; in the dark the pigment glows blue.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Purple-Blue – purple by day, glows blue. You will find all 11 colours under \u003ca href=\"\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Purple-Blue in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232671625600,"sku":"pigment-purple-blue-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-lila-blau-5-15um-100g_df360a9a-451c-463b-9d5a-41d4c9e748ba.jpg?v=1793116594"},{"product_id":"feinpigment-blau-blau-5-15um-100g","title":"Fine Glow Pigment Blue-Blue 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eBlue-Blue:\u003c\/strong\u003e blue by day; in the dark the pigment glows blue.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Blue-Blue – blue by day, glows blue. You will find all 11 colours under \u003ca href=\"\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Blue-Blue in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232674574720,"sku":"pigment-blue-blue-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-blau-blau-5-15um-100g_154d7e14-caab-417a-8267-12ec201214cd.jpg?v=1793116600"},{"product_id":"feinpigment-gelb-gruen-5-15um-100g","title":"Fine Glow Pigment Yellow-Green 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eYellow-Green:\u003c\/strong\u003e yellow by day; in the dark the pigment glows yellow-green.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Yellow-Green – yellow by day, glows yellow-green. You will find all 11 colours under \u003ca href=\"\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Yellow-Green in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232675393920,"sku":"pigment-yellow-green-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-gelb-gruen-5-15um-100g_dc335bda-a083-4512-91bd-c082758a46af.jpg?v=1793116606"},{"product_id":"feinpigment-natur-blau-5-15um-100g","title":"Fine Glow Pigment Natural Blue 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eNatural Blue:\u003c\/strong\u003e whitish by day; in the dark the pigment glows blue.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Natural Blue – whitish by day, glows blue. You will find all 11 colours under \u003ca href=\"\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Natural Blue in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232676639104,"sku":"pigment-nature-blue-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-natur-blau-5-15um-100g_1d1ce0fa-592b-415f-a6a8-0dcf621dae53.jpg?v=1793116613"},{"product_id":"feinpigment-natur-gruenblau-5-15um-100g","title":"Fine Glow Pigment Natural Green-Blue 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eNatural Green-Blue:\u003c\/strong\u003e whitish by day; in the dark the pigment glows green-blue.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Natural Green-Blue – whitish by day, glows green-blue. You will find all 11 colours under \u003ca href=\"\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Natural Green-Blue in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232678441344,"sku":"pigment-nature-greenblue-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-natur-gruenblau-5-15um-100g_36ce0ac3-0896-45bf-a497-15cd5f2b579f.jpg?v=1793116619"},{"product_id":"feinpigment-gruen-gruen-5-15um-100g","title":"Fine Glow Pigment Green-Green 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eGreen-Green:\u003c\/strong\u003e green by day; in the dark the pigment glows green.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Green-Green – green by day, glows green. You will find all 11 colours under \u003ca href=\"\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Green-Green in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232678867328,"sku":"pigment-green-green-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-gruen-gruen-5-15um-100g_a7e44bb9-45dc-4d53-8ae2-a53db2ee789b.jpg?v=1793116626"},{"product_id":"feinpigment-orange-orange-5-15um-100g","title":"Fine Glow Pigment Orange-Orange 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eOrange-Orange:\u003c\/strong\u003e orange by day; in the dark the pigment glows orange.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Orange-Orange – orange by day, glows orange. You will find all 11 colours under \u003ca href=\"\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Orange-Orange in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232679227776,"sku":"pigment-orange-orange-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-orange-orange-5-15um-100g_4b7bc7ca-82a2-4d2a-96fe-661d067d18ea.jpg?v=1793116632"},{"product_id":"feinpigment-rot-rot-5-15um-100g","title":"Fine Glow Pigment Red-Red 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003eRed-Red:\u003c\/strong\u003e light red by day; in the dark the pigment glows reddish.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Red-Red – light red by day, glows reddish. You will find all 11 colours under \u003ca href=\"\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Red-Red in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232679653760,"sku":"pigment-red-red-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-rot-rot-5-15um-100g_66400fa6-f45c-460b-b27b-817c4b1fbbae.jpg?v=1793116638"},{"product_id":"feinpigment-pink-pink-5-15um-100g","title":"Fine Glow Pigment Pink-Pink 5–15 µm, 100 g – Glow in the Dark","description":"\u003cp\u003e\u003cstrong\u003ePink-Pink:\u003c\/strong\u003e pink by day; in the dark the pigment glows pink.\u003c\/p\u003e\n\u003cp\u003eThese glow pigments have a particularly fine particle size of 5–15 µm (micrometres, thousandths of a millimetre). This lets them pass through fine screen-printing meshes and airbrush nozzles, and they can be used for watch hands, watercolour or 3D printing with DLP\/SLA. The downside: the finer the particle size, the weaker the glow.\u003c\/p\u003e\n\u003ch3\u003eProperties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e strontium aluminate doped with europium and dysprosium, with a protective coating – which makes it water-resistant\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eParticle size:\u003c\/strong\u003e 5–15 µm – for comparison: our standard pigments in natural shades are approx. 70–85 µm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Pink-Pink – pink by day, glows pink. You will find all 11 colours under \u003ca href=\"\/collections\/feinpigmente\"\u003eFine pigments\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAfterglow duration:\u003c\/strong\u003e shorter than with our standard pigments (there up to 12, 4 or 2 hours depending on colour, after a full charge in complete darkness), because the fine grain stores less light. The natural shades glow longest, then the lightly tinted ones (Yellow-Green, Green-Green, Orange-Orange), and the darkly tinted ones shortest (Blue-Blue, Purple-Blue, Red-Red, Pink-Pink, Terracotta)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e untinted natural shades up to 1,200 °C; do not process tinted shades above approx. 150 °C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eClassification:\u003c\/strong\u003e not classified as hazardous under CLP – see safety data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to use the fine pigments\u003c\/h3\u003e\n\u003cp\u003eLike all glow pigments, this powder is stirred into a carrier that is as clear as possible. As a starting point we recommend \u003cstrong\u003eapprox. 20% pigment relative to the carrier\u003c\/strong\u003e. Test the mixture on a small sample first.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eScreen printing:\u003c\/strong\u003e stir into transparent screen-printing ink. Rule of thumb: the pigment size should be no more than approx. one fifth of the mesh opening. We recommend meshes from 32T to 80T (80T: mesh opening 78 µm, printable up to approx. 16 µm).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAirbrush:\u003c\/strong\u003e in transparent varnish, apply in several thin coats.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWatch hands and fine markings:\u003c\/strong\u003e apply two coats; the glow is slightly weaker than with coarser pigment.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePlastics and 3D printing:\u003c\/strong\u003e the pigment is hard and abrasive – nozzles and tools wear faster. The higher the proportion, the more the strength of the plastic may suffer.\u003c\/li\u003e\n\u003cli\u003eThe lighter and more transparent the carrier, the stronger the glow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cp\u003e100 g special glow pigment in the colour Pink-Pink in a resealable bag.\u003c\/p\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cp\u003eOnly choose the fine particle size if your application requires it: for casting resin, varnish or paint, coarser pigments glow much more strongly. Tinted shades glow more weakly than the natural shades; a true red is technically not possible. Afterglow is an aid for orientation and effects, not lighting: it is visible in real darkness, barely under a street lamp. Colours look different in photos depending on the camera and charge. The raw pigment is not a toy. When processing larger quantities, avoid dust and contact with skin and eyes.\u003c\/p\u003e","brand":"lumentics","offers":[{"title":"Default Title","offer_id":60232680440192,"sku":"pigment-pink-pink-100g-15um","price":24.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/files\/feinpigment-pink-pink-5-15um-100g_c77f36a3-f45a-4e31-a54e-fac2ae91950e.jpg?v=1793116644"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/8554\/8672\/collections\/pigmente-gruen-4_5a4baab2-d0ec-4b7f-83eb-390bfcf0c8f3.jpg?v=1793085243","url":"https:\/\/lumentics.com\/collections\/nachleuchtpigmente.oembed","provider":"lumentics","version":"1.0","type":"link"}