3D Printing Resin Green-Blue 500 g – Glow in the Dark for DLP/SLA

Glow-in-the-dark printing resin for resin 3D printers with a UV light source around 405 nm. The glow pigments are already mixed in: printed objects charge with light and have a green-blue afterglow in the dark. The resin prints like standard resins; no special settings are needed. In the dark, green-blue looks slightly cooler than green.

Properties

• Printers: DLP, SLA, LFS, LCD and LCS with a UV source around 405 nm
• Contents: 500 g in a light-protected, leak-proof bottle
• Glow colour: green-blue; afterglow duration approx. 4 hours, depending on charging, in complete darkness
• Print result: high hardness, low shrinkage, low odour during processing
• Mixable: with other printing resins – the glow intensity then decreases proportionally
• Data sheets: safety data sheet and technical data sheet available as downloads

How to print with the glow resin

1. Shake the bottle vigorously for at least 2 minutes before pouring. The pigments are heavier than the resin and settle.
2. Start with your printer's standard values. Because of the slightly thicker consistency, increase the light-off time by 1–2 seconds if necessary.
3. Keep printed objects to a maximum height of approx. 10 cm; during longer prints the pigments can sink slightly, and the object glows unevenly.
4. Return leftover resin to the bottle after printing so that you can reuse it.

Tip for the Elegoo Mars: the build plate has a release coating from the factory. Sand it lightly with not-too-coarse sandpaper and choose a burn-in exposure of at least 60 seconds – in our experience the print then adheres well.

No printer of your own? We also offer a 3D printing service – feel free to contact us.

What's included

500 g glow-in-the-dark 3D printing resin green-blue in a light-protected, leak-proof bottle.

Good to know

Labelling under CLP: signal word Warning. Causes skin irritation (H315) and serious eye irritation (H319), may cause an allergic skin reaction (H317) and may cause respiratory irritation (H335); harmful to aquatic life with long lasting effects (H412). Wear protective gloves and eye protection, and ventilate well. Details in the safety data sheet. Solid areas glow more strongly than thin walls. Afterglow is an aid for effects and orientation, visible in real darkness.