3D Printing Resin Clear – Transparent Resin for DLP/SLA, 500 g or 1 kg

Transparent printing resin for resin 3D printers with a UV light source around 405 nm. It is deliberately clear and colourless so that you can tint it yourself with colour or glow pigments – or print it clear. The resin prints like standard resins; no special settings are needed.

Properties

• Printers: DLP, SLA, LFS, LCD and LCS with a UV source around 405 nm
• Sizes: 500 g or 1 kg, in a light-protected, leak-proof bottle
• Tintable: developed for use with colour and glow pigments
• Print result: high hardness, low shrinkage, good flow, low odour, BPA-free
• Mixable: with other printing resins
• Data sheet: technical data sheet available as a download

How to print with the clear resin

1. Start with your printer's standard settings.
2. If you stir in pigments: shake the bottle vigorously for at least 2 minutes before every pour so that the pigments are evenly distributed. As a rule of thumb, use approx. 20% pigment relative to the resin; check the mixture with a small test print first.
3. With a thicker consistency, increase the light-off time by 1–2 seconds.
4. Keep printed objects to a maximum height of approx. 10 cm.

Adhesion to the build plate: Some build plates have a release coating from the factory. Lightly sanding with fine sandpaper and a burn-in exposure of at least 60 seconds for the first layers have proven effective.

What's included

Clear 3D printing resin in the selected size (500 g or 1 kg) in a light-protected, leak-proof bottle.

Good to know

Liquid printing resin is a chemical: wear protective gloves, ventilate well and avoid skin contact. The hazard and safety information is on the bottle; we will send you the safety data sheet on request. The clear resin itself does not glow.