Glow in the Dark Paint Green 100 g – Phosphorescent Acrylic Paint

The green glow in the dark paint comes ready-mixed: stir, apply, charge with light – in the dark the design glows without electricity. This variant is tinted light green in daylight and glows green in the dark. It is a good choice if the design should also be coloured during the day.

Typical uses are star designs on walls and ceilings, pictures on canvas, painted stones and decorations, as well as markings on light switches and stair edges for orientation in the dark.

Properties

• Colour: light green in daylight, green in the dark
• Afterglow duration: up to 4 hours after a full charge, in complete darkness; most intense in the first few minutes
• Ready to use: acrylic paint based on our strontium aluminate glow pigments, can be thinned with water
• Surfaces: paper, cardboard, wallpaper, canvas, wood, rubber, stone and glass
• Charging: with daylight or lamplight, as often as you like; fastest with UV light or sun
• Origin: Made in Germany

How to use the glow in the dark paint

1. Stir the paint thoroughly, including at the bottom of the bottle – the glow pigments settle.
2. Paint absorbent surfaces such as wallpaper, paper or wood directly. Prime smooth surfaces first; prime dark surfaces in a light colour – ideally white.
3. Apply with a brush, sponge or roller. Paint larger areas with a soft roller in 2–3 coats; let each coat dry before the next.
4. Several thin coats glow more strongly than one thick coat. For a smoother surface, thin the paint slightly with water – thinning it more reduces the glow.
5. Clean brushes and rollers with water afterwards and close the bottle tightly.

Tip: The paint is not weatherproof. Outdoors and on furniture in everyday use, seal the dried coat with a solvent-based clear varnish. It also adheres to fabric and leather; wash textiles at no more than 30 °C.

What's included

1 resealable bottle with 100 g (approx. 90 ml) glow in the dark paint green.

Good to know

Afterglow is an aid for orientation and effects, not a light source: it becomes visible in real darkness and barely under a street lamp. The ready-mixed paint is too thick for casting resin and pouring – our glow pigments are suitable for that. You can find the safety data sheet (lumentics glow paste, also valid for the glow in the dark paints) in the downloads on this page.