Glitter Powder Blue-Green 50 g – Glow-in-the-Dark Glitter

Two effects in one powder: in daylight the fine glitter sparkles, in the dark the pigment glows blue-green. By day the powder is light and whitish with a slight green tint, so it suits almost any surface. Suitable for decoration, resin art, nail design and starry skies on the bedroom ceiling.

Properties

• Material: mixture of fine, transparent glitter and glow pigment based on strontium aluminate; insoluble in water
• Afterglow duration: up to 12 hours after a full charge in complete darkness; slightly weaker than pure pigment because of the glitter content
• Colour: light by day, whitish with a slight green tint; blue-green in the dark
• Particle size: approx. 75–120 µm (1 µm = one thousandth of a millimetre)
• Heat-resistant: up to 150 °C
• Classification: not classified as hazardous under CLP – see safety data sheet

How to use the glitter powder

Stir the powder into a colourless carrier such as epoxy or casting resin, clear varnish, gel, wax, wallpaper paste or glue. As a starting point we recommend approx. 20% powder relative to the carrier (10–50%). The higher the proportion, the stronger the glow. Test the mixture on a small sample first.

• You can also sprinkle the powder directly onto sticky or absorbent surfaces.
• The more transparent and lighter the carrier, the stronger the glow. Prime dark surfaces in a light colour first.
• For outdoor use, use weather-resistant binders such as synthetic resin varnish; indoors, solvent-free carriers such as clear varnish or wallpaper paste are suitable.

What's included

50 g glitter powder blue-green in a poly bag.

Good to know

Because of the glitter content, the powder glows slightly more weakly than pure pigment – but it sparkles by day. Afterglow is an effect, not a light source: it becomes visible in real darkness. Not a toy. Avoid dust and contact with skin and eyes when processing.