Glow in the Dark Varnish White 250 ml – Coloured Glow Varnish

The glow varnish is ready to use: stir, paint, charge with light. White stays white and inconspicuous in daylight and glows whitish in the dark. To be honest: white only glows briefly and fairly weakly – it is chosen mainly for its very light daylight colour.

Properties

• Type: ready-to-use acrylic-based glow varnish – stir, paint, done
• Surfaces: paper, cardboard, wallpaper, canvas, wood, stone, rubber and glass
• Application: with a brush or roller, approx. 40 µm per coat; 3–4 coats for maximum afterglow; one tin covers over 2.5 m² with three coats
• Colour: white by day, whitish in the dark
• Charging: with daylight or lamplight, fastest with UV light or sunlight
• Origin: Made in Germany

How to paint correctly

1. Clean the surface and let it dry. You can paint highly absorbent surfaces such as wallpaper, paper or wood directly; prime smooth surfaces such as glass or painted metal first.
2. Stir the varnish thoroughly, especially at the bottom of the tin – the glow pigments settle over time.
3. Apply with a brush or roller, approx. 40 µm per coat. The varnish is dry after approx. 1 hour, and you can apply the next coat after approx. 1 hour. 3–4 coats give maximum afterglow.
4. Outdoors, also seal the dried layer with clear varnish – the glow varnish itself is not weatherproof.

Tip: The lighter the surface, the more strongly the varnish glows. Prime dark surfaces white first.

What's included

1 metal tin with 250 ml glow varnish white, ready to use.

Good to know

Afterglow is an aid to orientation and a visual effect, not a light source: it becomes visible in real darkness. Low odour, acrylic-based. The safety data sheet and technical data sheet with application notes are available in the downloads on this page.