Luminous Paint for Watch Hands Green-Green 2 g – Fine Glow Paste

The luminous paint for watch hands is a ready-mixed glow paste with a fine grain – made for small, precise areas such as hand tips, numerals and hour markers. In daylight the paste is tinted green, in the dark it glows green – so the marking is coloured during the day too.

Also suitable for model making, jewellery, electronics and small markings on switches or keys that should remain recognisable at night.

Properties

• Colour: green in daylight, green in the dark
• Afterglow duration: up to 4 hours after a full charge, in complete darkness; somewhat weaker than coarser pigments due to the finer grain
• Fine grain: can be applied precisely with a needle, toothpick or fine brush
• Ready to use: acrylic-based, no mixing required, can be thinned with water if needed
• Surfaces: metal, glass, plastic, wood, paper, stone and many more
• Charging: with daylight, lamplight or UV light, as often as you like
• Origin: Made in Germany

How to apply the glow paste

1. Take the paste directly from the bottle with a fine needle, a toothpick or a fine brush and apply it.
2. Let it dry and apply a second coat – two coats give a much stronger glow.
3. Has it become too thick? Thin with a little water. Thinning it more reduces the glow.
4. Close the bottle tightly after use so that the paste does not dry out.

Tip: The lighter the surface, the stronger the glow. Prime dark hands in a light colour first. For outdoor use, cover the dried layer with a solvent-based sealant.

What's included

1 glass bottle with screw cap containing approx. 2 g of luminous paint for watch hands Green-Green.

Good to know

The paste contains no radioactive substances; it glows solely from stored light. The glow becomes visible in real darkness and is strongest in the first few minutes after charging. You will find the safety data sheet in the downloads.